粘性物料烘幹機,小顆粒造粒機,顏料染料烘幹機,熱敏物料幹燥箱-常州市丝瓜视下载app最新版幹燥設備有限公司
返回列表
您當前的位置: 產品展廳 > 粒狀洗衣粉,魚粉,瓷粉烘幹機丝瓜app色版牌噴霧幹燥機
粒狀洗衣粉,魚粉,瓷粉烘幹機丝瓜视下载app污不用付费牌噴霧幹燥機
發表於:2019-11-15 11:29
產品詳細說明
品牌: 丝瓜视下载app污不用付费 型號: LPG-5
貨號: LPG係列 用途: 乳濁液烘幹機
外型尺寸: 多種
粒狀洗衣粉,魚粉,瓷粉烘幹機丝瓜视下载app污不用付费牌噴霧幹燥機

粒狀洗衣粉,魚粉,瓷粉烘幹機丝瓜视下载app污不用付费牌噴霧幹燥機


Specifications
Centrifugal spray dryer:
1,The powder was made from solution directly.
2,fast in drying, uniform in size, good in fluidity.
規範
離心噴霧幹燥機:
1、溶液可直接製成粉末狀。
2、幹燥速度快,粒度均勻,流動性好。

Description of centrifugal spray dryer:
The spray drying is the widest used technology in the liquid shaping technology and in the drying industry. It is most suitable for producing powder, particle, or block solid products from materials of solution, emulsion, soliquoid and pumpable paste states. Therefore, when the particle size and distribution of the final products, their residual water contents, the stocking density and the particle shape meet the precision standards, the spray drying is one of the most desired technologies.
離心噴霧幹燥機描述:
噴霧幹燥是液體成型技術和幹燥工業中應用最廣泛的技術。適用於從溶液、乳液、固形物和可泵送的糊狀物料中生產粉狀、顆粒狀或塊狀固體產品。因此,當最終產品的粒度和分布、殘餘含水量、密度和顆粒形狀均達到精度標準時,噴霧幹燥是最理想的工藝之一。

Features of centrifugal spray dryer:
1,  High speed of drying. After the spraying of he material liquid, the surface area of the material will be increased greatly. In the hot-air flow, 95%-98% of water can be evaporated at a moment. The time of completing the drying needs only several seconds.
2,  It is especially suitable for drying the heat sensitive materials. It’s final products own the good uniformity, mobility, dissolving capacity. And the final products are high in purity and good in quality.
3,  The production procedure is simple and the operational control is easy. The liquid with the moisture contents 40-60%(for special materials, the contents may reach 90%) can be dried into power or particle products once a time. After the drying, there is no need for smashing of sorting, so as to reduce the operation procedures in the production and enchance the purity. The product particle diamenters, looseness and water contents can be adjusted through changing the operation condition in a certain scope. It is very convenient to carry out the control and management.
離心噴霧幹燥機的特點:
1、幹燥速度快。噴塗原材料液後,材料的表麵積將大大增加。在熱風流動中,95%-98%的水可以瞬間蒸發。幹燥完成隻需幾秒鍾。
2、特別適用於熱敏性物料的幹燥。產品具有良好的均勻性、流動性、溶解能力。產品純度高,質量好。

3、生產工藝簡單,操作控製簡單。水分含量40-60%的液體(特殊物料可達90%)可一次幹燥成粉狀或顆粒狀產品。幹燥後無需粉碎分選,減少了生產中的操作程序,提高了產品的純度。通過在一定範圍內改變操作條件,可以調節產品的粒度、疏鬆度和含水量。


適用範圍:
化工:有機催化劑、樹脂、合成洗衣服、油脂類、染料、染料中間體、石墨等。
食品:氨基酸及類似物、調味料、蛋白質、澱粉、乳製品、咖啡提取物、魚粉、肉精等
製藥:中成藥、農藥、抗生素、醫藥衝劑等。
陶瓷:氧化鎂、瓷土、各種金屬氧化物、滑石粉、白雲石等。
注:易燃易爆物品禁用。

訂貨須知:
1、物料名稱、屬性:含固量或含水量,粘度、表麵張力、PH值。
2、幹燥後粉料容量、允許殘餘含水量、粒度、允許*溫度,
3、產量:每天工作時長。
4、可供能源:蒸汽壓力可供量、電容量、可供燃煤、油、氣量。
5、控製要求:進、出口溫度是否需要自控。
6、授粉要求:是否安裝袋式捕集器,環境對排放尾氣要求。